Product data

71
PCI Mezzanines – PMC & PC-MIP
MEN PCI Mezzanines – PMC & PC-MIP
■ 1-channel OHCI PHY/Link Layer Controller
■ TI TSB43AA22 integrated 1394a-2000
■ Up to 400Mbits/s
P14 – PC-MIP IEEE 1394 OHCI FireWire Controller
P13P14
■ 32 TTL inputs/outputs
■ 48mA drivers
■ Active terminators
■ Same line interface as SCSI
■ Fast 16-bit host access
Controller
■ TI TSB43AA22 Integrated 1394a-2000 OHCI
PHY/Link Layer Controller
Data Transfer Rates
■ 100, 200 and 400Mbits/s
PCI Characteristics
■ 32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.1
■ Target and initiator
Peripheral Connections
■ Via front panel on a shielded 6-pin Molex
receptacle connector
Miscellaneous
■ Cable Active LED for on-board diagnosis
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), 100mA max.
■■ +3.3V (3.0V..3.6V), 300mA max.
■■ +12V (11.4V..12.6V), 100mA max.
(without 1394 cable power charge)
■ MTBF: tbd. @ 50°C
Mechanical Specifications
■ Dimensions: PC-MIP Type II conforming
to PC-MIP specification
■ Weight: 23g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Windows 98 and Windows 2000, no drivers
necessary
P13 – PC-MIP 48-bit TTL I/O Interface
Input/Output
■ 48-bit TTL I/O
■ 6 groups, alternatively input or output
■ Active terminators can be activated
for each group
■ Output low current (VOL max. 0.55V):
min. 64mA
■ Output high current (VOH min. 2.0V):
min. -15mA
■ Input high current: max. 100µA
■ Input low current: max. -100µA
■ Input voltage: min. -0.5V, max. 6V
PCI Characteristics
■ 32-bit PCI, complying with PCI Local Bus
Specification,Rev. 2.1
■ Target
Peripheral Connections
■ Via front panel on a shielded 36-pin half-
pitch D-Sub receptacle connector
■■ Only Type II models
■■ 28-bit I/O, incl. trigger functionality
■ Via J3/carrier board (rear I/O)
■■ Type I and Type II models
■■ Full 48-bit I/O functionality
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), 1.1A
■■ +3.3V (3.0V..3.6V), 68mA
■ MTBF: 334,000h @ 50°C
Mechanical Specifications
■ Dimensions: PC-MIP Type I/II conforming to
PC-MIP specification
■ Weight:
■■ Type I module: 24g, type II module: 34g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C or -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)