Product data

70
PCI Mezzanines – PMC & PC-MIP
MEN PCI Mezzanines – PMC & PC-MIP
■ Dual 10/100Base-T Fast Ethernet
■ Dual Intel
®
82559 Controller
■ Dual RJ45 connector
■ Full duplex
■ Electrical isolation
■ FRAM technology
■ No batteries required
■ 256KB or 512KB
■ PC-MIP Type I
P15 – PC-MIP Non-volatile SRAM
Ethernet Interface
■ Two 10/100Base-T interfaces
■ Two 82559ER controllers
■ Full duplex support
■ Media Access Control (MAC) address stored
in onboard serial EEPROM
PCI Characteristics
■ 32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.1
■ Target and initiator
Peripheral Connection
■ Via front panel on two standard 8-pin RJ45
receptacle connectors
Electrical Specifications
■ Isolation voltage: 1kV RMS
(0..1000m above sea level)
■ Supply voltage/power consumption:
■■ +3.3V (3.0V..3.6V), 300mA typ., 450mA max.
■ MTBF: 490,000h @ 50°C
Mechanical Specifications
■ Dimensions: PC-MIP Type II conforming to
PC-MIP Standard
■ Weight: 30g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Drivers from Intel
®
for many operating
systems
■ Drivers already implemented in VxWorks,
Linux, QNX, OS-9
P15P16
Memory
■ 256KB or 512KB FRAM
■ Four memory banks with 512KB
■ Two memory banks with 256KB
■ Access time: 70ns
■ Cycle time: 130ns
PCI Characteristics
■ 32-bit/33-MHz PCI, complying with PCI Local
Bus Specification, Rev. 2.1
■ Target
Peripheral Connection
■ No peripheral connections
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), 22.5mA typ.
■■ +3.3V (3.0V..3.6V), 86.3mA typ.
■ MTBF: tbd. @ 50°C
Mechanical Specifications
■ Dimensions: PC-MIP Type I conforming to
PC-MIP Standard, without J3
■ Weight: 34g
Environmental Specifications
■ Temperature range (operation):
■■ -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Driver support for Linux, VxWorks, OS-9
P16 – PC-MIP Dual 100Base-T Ethernet