Product data

63
System-on-Module PCI-104
MEN System-on-Module PCI-104
WTB Physical Layer
■ Wire Train Bus WTB IEC61375-1 compliant
■ Two redundant channels
■ Fully isolated (1kV isolation voltage)
■ Generation of local fritting voltage 48V
(pulsed)
Universal Design
■ Controller board connected
by an 80-pin connector to the PHY board
■ FPGA Altera
®
Cyclone
TM
EP1C12
(optional EP1C20)
■ 2MB Flash for FPGA configurations
■ Optional 16MB DRAM
■ Simple functional updates
via software
PCI-104 Bus
■ Compliance with PCI-104 Specification
■ Two slots required
■ V(I/O): +3.3V
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.75V..5.25V), current 250mA typ.
■■ +3.3V (3.0V..3.6V), current 500mA typ.
■ MTBF: tbd @ 50°C
Mechanical Specifications
■ Dimensions: conforming to PCI-104
specification
■ Double slot to handle four 9-pin D-Sub
connectors
■ Weight: tbd.
Environmental Specifications
■ Fully compliant with EN50155 Tx
■ Temperature range (operation):
■■ -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation):
max. 95% non-condensing
■ Relative humidity (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ MEN Driver Interface System (MDIS for
Windows, Linux, VxWorks, QNX, RTX, OS-9)
■ 32-bit/33-MHz PCI target
■ WTB transmitter/receiver interface
■ 2 redundant channels
■ 1kV isolation
■ 48V local fritting voltage
■ 2MB Flash, optional 16MB SDRAM
■ Complies with PCI-104 specification
Product available Q II / 2005
PP05 – PCI-104 Module with WTB Interface