Product data

60
System-on-Module ESM
MEN System-on-Module ESM
EM01 – ESM with PowerPC MPC5200
Embedded System Module with:
■ MPC5200 / 384 MHz
■ Up to 256MB onboard DDR SDRAM
■ NAND Flash
■ Up to 2MB NVRAM
■ Up to 16MB graphics memory
■ Dual Fast Ethernet, COM, USB (front)
■ Dual CAN controller
■ Further COMs, graphics, IDE etc. optional via FPGA
■ Stackable with PCI-104
■ MENMON BIOS for PowerPC cards
CPU
■ PowerPC MPC5200 up to 400MHz
Memory
■ Level 1 Cache integrated in MPC5200
■ Onboard DDR SDRAM up to 256MB
■ 64MHz memory bus operation
■ Flash up to 8MB, 8-bit data bus
■ 2MB battery-backed SRAM
■■ Non-volatile memory
■■ 8-bit data bus
■ Serial EEPROM 16kbit for factory settings
■ Up to 1GB NAND Flash
■ Up to 16MB SDRAM, connected to FPGA,
e.g. for video data Interfaces
■ Two 10/100Mbits/s Ethernet interfaces
■■ One controlled by MPC5200 internal controller
■■ One controlled by FPGA
■■ Accessible at front panel on two RJ45
or one D-Sub connector
■ One UART RS232 serial interface (COM1)
■■ Accessible at front panel on RJ45
or D-Sub connector
■ USB 1.1
■■ Accessible at front panel on standard Type A
connector
■ Dual CAN controller
■■ MPC5200 internal controller
■■ Accessible via onboard connectors
Additional I/O through FPGA
■ Available at I/O connector
■ Depending on FPGA composition
■ IDE port
■ Further UARTs
■ Floppy disk interface
■ Display control
■ Touch panel control
■ Other/further I/O options on request
PCI Interface
■ 32-bit PCI interface at PCI-104 connector J1
■ Support of 4 external masters
Miscellaneous
■ Real-time clock
■ Power supervision and watchdog
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), tbd.
■■ +3.3V (3.0V..3.6V), tbd.
■ MTBF: tbd. @ 50°C
Mechanical Specifications
■ Dimensions: conforming to ESM specification
(PCB: 149mm x 71mm)
■ Weight: tbd.
Environmental Specifications
■ Temperature range (operation):
■■ -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Software Support
■ VxWorks
■ Linux (ELinOS)
■ MENMON
EM01A – I/O on J3
ESM with MPC5200
EM01A offers 2 Fast Ethernet, COM and USB
via J3 rear I/O connector instead of 2 Fast
Ethernet, COM and USB via RJ45 on front
(EM01).