Product data

CPU
PowerPC
MPC8245
266MHz..400MHz
Memory
Level 1 Cache integrated in MPC8245
SO-DIMM slot for up to 512MB SDRAM
133MHz memory bus operation
Flash 2MB
8-bit data bus
Serial EEPROM 4kbit for factory settings
CompactFlash (TM) card interface for Flash
ATA (true IDE)via on-board IDE
32MB SDRAM, connected to FPGA,
e.g. for video data
Interfaces
Two 10/100Mbits/s Ethernet channels
GD82551 controllers
Two RJ45 connectors at front panel
Two UART RS232 serial interfaces
(COM1/COM2)
Two RJ45 connectors at front panel
IDE port for hard-disk drives
Available at I/O Connector
If implemented in FPGA
I/O options through FPGA
Available at I/O connector
All functions optional, depending
on FPGA composition
IDE interface
SPI interface (e.g. for touch panel control)
SRAM controller
Quad UART
RTS-controlled UART
CAN interface
GPIO
Display control for TFT panels, 800 x 600
pixels, 16-bit color
PCI Interface
32-bit PCI interface at PCI-104 connector J1
Support of 2 external masters
Miscellaneous
Real-time clock
Power supervision and watchdog
Electrical Specifications
Supply voltage/power consumption:
+5V (4.85V..5.25V), 500mA
+3.3V (3.0V..3.6V), 1A, w/o SO-DIMM;
increases up to 1.6A
depending on installed SO-DIMM
MTBF: 160,000h @ 50°C
Mechanical Specifications
Dimensions: conforming to ESM specification
(PCB: 149mm x 71mm)
Weight: 100g
Environmental Specifications
Temperature range (operation):
0..+60°C or -40..+85°C
Airflow: min. 10m
3
/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% nc
Relative humidity (storage): max. 95% nc
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Safety
PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
MENMON
Linux (ELinOS)
VxWorks
QNX (on request)
OS-9 (on request)
CANopen support: MEN Driver Interface
System (MDIS for Windows, Linux, VxWorks,
QNX, RTX, OS-9)
MSCAN/Layer2 support:
MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)
57
System-on-Module ESM
MEN System-on-Module ESM
EM04N – ESM with PowerPC MPC 8245
Embedded System Module with:
PowerPC MPC8245 up to 400 MHz
FPGA 250,000 gates
Up to 512 MB SDRAM, CompactFlash
Dual Fast Ethernet, dual COM (front)
Graphics optional via FPGA (plus 16 MB SDRAM)
Further COMs, CANopen, IDE etc. optional via FPGA
(USB, keyboard/mouse, floppy etc.
optional on carrier board)
Stackable with PCI-104
MENMON BIOS for PowerPC cards