Product data

Busless
MEN Busless
46
ESM – Embedded System Modules
F8 – 3U Infotainment SBC
B12 – 3U PowerPC SBC
■ 32-bit cPCI system slot or stand-alone, 12 HP
■ Transmeta Crusoe TM5900 / 800 MHz
■ 512 MB DDR RAM (SO-DIMM) installed
■ CompactFlash slot
■ 2.5" hard disk slot
■ Dual Fast Ethernet, COM 1, USB1.1 (front)
■ DVI and DVI-I (front)
■ LCD (up to UXGA) and CRT
■ 16 MB integrated graphics RAM
■ Up to 1600 x 1200 pixels
■ AC'97 (opt. isolation), keyboard/mouse, CAN, COMs...
optional via FPGA with SA-Adapters
■ Option: up to 8 SA-Adapters
■ MPC823e/66MHz
■ 1-slot VMEbus master/slave or busless
■ 128MB DRAM, 32MB Flash, CompactFlash
■ 10Mbit Ethernet
■ 3 COMs, 3 CAN
■ 1 M-Module slot
■ CANopen support
■ Full EN50155 compliance
For detailed description see page 32.
F11 – 3U Pentium
®
III SBC
■ 32-bit cPCI/PXI system slot or stand-alone, 12 HP
■ ULP Pentium
®
III up to 933 MHz
■ ULV Celeron
®
up to 650 MHz
■ Up to 512 MB DRAM, 2MB SRAM, CompactFlash
■ 2 Fast Ethernet, COM 1, 2 USB 1.1 (front)
■ Option: COM 2 (front)
■ VGA/digital video output, keyboard/mouse (front)
■ Up to 1600 x 1200 pixels
■ IDE (on-board)
■ Prepared for 2.5" hard disk on board
■ FPGA – further programmable I/O functions
■ Option: up to 7 SA-Adapters
ESM modules are complete computers on a plug-on module. The ESM
consists of a computing core (x86 or RISC CPU, chipset and memory),
board-specific I/O, an FPGA that can be used for a range of application-
specific functions, and board support packages for various operating
systems. A complete embedded control consists either of a stand-alone
ESM (the power supply connection is sufficient to operate the module),
an ESM with an application-specific carrier card and/or an ESM with an
additional plugged PCI-104 module.
For detailed description see page 52-65.
For detailed description see page 9.
For detailed description see page 6.