Product data

23
CompactPCI
MEN CompactPCI
■ 1-slot CompactPCI peripheral board
■ 4 optically isolated units with 32 channels
for each unit
■ Individual use of each channel as input or output
■ Individual edge-triggered interrupts
■ Input/output load on ground
■ High-side output switches
■ High output current: max. 1.9A per channel
or 16A per unit
■ Over-current and over-temperature protection
D302 – 6U CompactPCI Card with 128 Binary I/Os
Binary I/Os
■ 128 binary signals
■■ 4 optically isolated units
■■ 32 channels for each unit
■ Individual use of each channel as input
or output
■ Individual edge-triggered interrupts
■ Input/output load on ground
■ High-side output switches
■ High output current
■■ Max. 1.9A per channel
■■ Max. 16A per unit
■ Over-current and over-temperature
protection
Output Characteristics
■ Output voltage range: 12V..32V
■ Output current log. 0: max. 10mA
■ Output current log. 1: max. 1.9A
■ Switching time for output change: < 200µs
■ Isolation voltage (optocoupler): 500V DC
Input Characteristics
■ Input voltage min.: 0V
■ Input voltage max. external supply voltage
(12..32V)
■ Voltage level log. 0: 0V..6V or open
■ Voltage level log. 1: 12V..32V
■ Input current log. 1: 2.03mA @ 24V
■ Switching threshold: 9.2V @ 0.78mA typ.
■ Switching time for input change:
min. 33µs, max. 44µs
■ Excess voltage protection: max. +47V
Peripheral Connections
■ Via front panel on four shielded 44-pin
HD-Sub receptacle connectors
CompactPCI Bus
■ CompactPCI peripheral slot
■■ PICMG Spec. 2.0 R3.0 compliant
■■ 32-bit data bus
■■ 33MHz
■ V(I/O): +5V
■ Concurrent primary and secondary
bus operation
Electrical Specifications
■ Isolation voltage
■■ 500V DC between isolated side and
digital side
■■ 180V DC between the channels
■■ Voltage between the connector shield
and isolated ground is limited to 180V using
a varistor; AC coupling between connector
shield and isolated ground through
47nF capacitor
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), 106mA
■■ +3.3V (3.0V..3.6V), 27mA
■■ +24V (external supply voltage 12..32V),
78mA (total for all units)
■ MTBF: 129,000h @ 50°C
Mechanical Specifications
■ Dimensions: standard double Eurocard,
233.3mm x 160mm
■ Weight: 324g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C or -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity range (operation):
max. 95% without condensation
■ Relative humidity range (storage): max. 95%
without condensation
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux,
VxWorks, QNX, RTX, OS-9)