Product data

19
CompactPCI
MEN CompactPCI
Processor
■ MPC8560/800MHz (1GHz optional)
■ Passive heatsink
■ e500 PowerPC core with FPU and MMU
■ Integrated Northbridge and Southbridge
■ High memory bandwidth
Memory
■ SO-DIMM socket for DDRAM 333
■ Up to 2GB ECC DRAM
■■ SO-DIMM
■ 32KB nonvolatile FRAM
■ 2MB FPGA NOR Flash
■ Up to 1GB NAND Flash
(depending on chip availability)
CompactPCI Bus Interface
■ Universal bridge, system, peripheral
or stand-alone operation
■ 64-bit/66MHz 3.3V VIO
PMC Slots
■ Two PMC slots up to 64-bit/64MHz,
3.3V VIO
■ PMC I/O module (PIM) support through J4
I/O
■ MPC8560
■■ COM1 available at the front or on rear I/O
■■ COM2 available at the rear
■■ Two 1Gb Ethernet channels compatible
with PICMG 2.16
■■ One 100Mb Ethernet channel compatible
with PICMG 2.16
■■ Ethernet controllers are integrated in the CPU
to guarantee real throughput
■ FPGA
■■ Parallel ATA available on board for on-board
hard disk extension or rear I/O
■■ SRAM controller
■■ NAND Flash controller for on-board Flash disk
■■ Open for additional functions like
2D graphics, CAN etc.
Supervisor
■ Real-time clock with 256B GoldCap backup
CMOS RAM
■ Support of a system management interface
via non-intelligent IPMI
■ Flexible Watchdog timers based
on the FPGA
■ Detection of restart cause from memory
Mechanical Specifications
■ 6U, 4HP standard cPCI 6U board
Compliance
■ CompactPCI Core Specification
PICMG 2.0 R3.0
■ CompactPCI Hot Swap Specification
PICMG 2.1 R2.0
■ CompactPCI System Management
PICMG 2.9 R1.0
■ CompactPCI Packet Switching Backplane
PICMG 2.16 R1.0
Power Requirements
(MPC8560, 1GB Memory)
■ +5V (+5%, -3%), 3A typically
■ +3.3V (+5%, -3%), 1Amps typically
■ +12V, ±5%, only used for PMCs
■ -12V, ±5%, only used for PMCs
Environmental Specifications
■ Temperature range (operation):
■■ 0..+50°C
■■ Airflow: min. 10m
3
/h
■■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
MENMON
■ New MENMON Hurricane
■ Telnet server
■ MENMON console over network and Flash
update over network
■ HTTP Server, setup/control via browser
■ VGA/framebuffer devices
■■ Optional touch/virtual keyboard
■ Boot Logo while booting
■■ BMP file from onboard medium (CF)
■ Setup menu
■ Extended diagnostics
■ Program update
■ Load file from disk
■■ From root directory of DOSFS
■■ From PReP partition
■■ Disk update
Software Support
■ Linux
■ VxWorks
■ QNX
■ PowerPC MPC8560/800MHz
■ 1-slot CompactPCI 64-bit/66MHz
■ System slot, peripheral slot or stand-alone
■ Hot-swap and PICMG 2.16 support
■ Up to 2GB ECC DRAM
■ NAND Flash, FRAM
■ Graphics via PMC or FPGA
■ 2 Gigabit/1 Fast Ethernet
■ Parallel ATA for on-board hard disk
■ Further I/O individual via FPGA
■ 2 PMC slots
■ MENMON BIOS for PowerPC cards
Product available Q II / 2005
D5 – 6U CompactPCI PowerPC SBC