Product data

16
CompactPCI
MEN CompactPCI
1 CompactPCI bus slot
2 M-Module slots
Flexible PXI trigger routing
1 CompactPCI bus slot
1 M-Module slot
Flexible PXI trigger routing
CompactPCI Bus
Compliance with CompactPCI Specification
2.0 R2.1
Only one slot required on the
3U CompactPCI bus
FPGA-based PCI-to-M-Module bridge
Target on PCI bus
Max. clock frequency 33MHz
Compliance with PCI Specification 2.2
32-bit PCI data bus
V(I/O): +5V (+3.3V on request)
M-Modules
F204: one M-Module slot on the board
F205: two M-Module slots on the board
M-Module compliance: D08, D16, A08, INTA,
TRIGA, TRIGB
Eight trigger lines compliant
with PXI Specification
Routing of PXI trigger lines to M-Module
interface TRIGA, TRIGB
Peripheral Connections
Via front panel
Electrical Specifications
Supply voltage/power consumption:
+5V (4.85V..5.25V), 20mA typ.
+3.3V (3.0V..3.6V), 20mA typ.
MTBF: tbd. @ 50°C
Mechanical Specifications
F204:
Dimensions: conforming to CompactPCI
specification for 3U boards
Front panel: aluminum with 1 handle,
cut-out for front connector of M-Module
Weight: tbd. (without M-Modules)
F205:
Dimensions: 111.7mm x 160mm
Usable in 3U racks with standard
19“ low profile rails
Front panel: aluminum without handles,
cut-outs for front connectors of 2 M-Modules
Weight: tbd. (without M-Modules)
Environmental Specifications
Temperature range (operation):
0..+60°C or -40..+85°C
Airflow: min. 10m
3
/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% nc
Relative humidity (storage): max. 95% nc
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Safety
PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022
(radio disturbance), IEC1000-4-2 (ESD) and
IEC1000-4-4 (burst) with regard to
CE conformity
Software Support
M-Module drivers for Windows, VxWorks,
Linux, OS-9, RTX as supported
F205/F204 – 3U CompactPCI/PXI Carrier Boards for M-Modules