Product data

CompactPCI Bus
■ Compliance with CompactPCI Specification
■ 32bit PCI data bus, 33MHz (opt. 66MHz)
■ V(I/O): +3.3V
Universal Design
■ FPGA Altera
®
Cyclone
™
EP1C12
■ 2MB Flash for FPGA configurations
■ Simple functional updates via software
Function
■ cPCI to PC/104 bridge
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.75V..5.25V), current depends only
on PC/104 modules mounted
■■ +3.3V (3.0V..3.6V), current typ. > 500mA
■■ MTBF: 158,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to CompactPCI
specification for 3U boards
■ Single 3U front panel slot (additional slots
may be required for PC/104 modules
mounted)
■ Front panel: aluminum with 1 handle
■ Weight: tbd
Environmental Specifications
■ Temperature range (operation):
■■ -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Depending on PC/104 module
15
CompactPCI
MEN CompactPCI
■ 1 CompactPCI slot 32-bit/33MHz (opt. 66MHz)
■ 4HP closed front panel
■ 1 to 4 PC/104 slots
■ PCI-to-ISA bridge
F206I – 3U CompactPCI-ISA Carrier Board for PC/104
■ Octal 16450 UART
■ Large receive and transmit FIFOs
■ Very high data rates up to 2Mbits/s
■ Full handshake support
■ Hardware flow control for RS485 half duplex
■ EP1C12 Cyclone FPGA
■ 2MB Flash, opt. 16MB DRAM
■ 32-bit/33-MHz PCI bus (opt. 66MHz), 3.3V VIO
■ Physical layer via SA-Adapters
(RS232/422/485/TTY, isolated/not isolated)
■ Prepared for 4 SA-Adapters (2 slots)
■ Opt. 2 SA (1 slot) / 8 SA-Adapters (4 slots)
■ Appl. for other protocols like HDLC
■ Appl. as intell. I/O node (NIOS)
CompactPCI Bus
■ Compliance with CompactPCI Specification
■ Only one slot required on 3U CompactPCI
bus for up to two UARTs
■ Up to three supplementary cPCI slots
required for overall eight UARTs
■ V(I/O): +3.3V
Universal Design Bus
■ FPGA Altera
®
Cyclone
TM
EP1C12
■ 2MB Flash for FPGA configurations
■ Simple functional updates via software
Peripherals
■ Up to eight UARTs via front panel
■ Different variations with SA-Adapters possible:
■■ RS232
■■ RS422
■■ RS485
■■
TTY
■ Four status LEDs
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.75V..5.25V), current depends
only on SA-Adapters mounted
■■ +3.3V (3.0V..3.6V), current typ. > 500mA
■ MTBF: 154,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to CompactPCI
specification for 3U boards
■ Single 3U front panel slot for up to
two UARTs
■ Front panel: aluminum with 1 handle
■ Weight: tbd.
Environmental Specifications
■ Temperature range (operation):
■■ -40..+85°C
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Linux
■ VxWorks
■ Windows XP
F206 – 3U CompactPCI Octal UART for SA-Adapters