Product data

4 RS232 Interfaces
■ 2 with 4 lines (2 modem control lines)
■ 2 with 6 lines (4 modem control lines)
■ All 4 channels optically isolated from the
system and from each other
CL-CD1400 Communication Engine
■ Software programmable serial data rates
up to 135kbits/s full duplex on 4 channels
■ 12 bytes of FIFO for each transmitter/receiver
■ GOOD DATA interrupts eliminate the need
for character status check
■ Independent bit rate selections for transmit
and receive on each channel
■ Autom. flow control modes
for serial channels:
■■ XON/XOFF, RTS/CTS, DTR/DSR
■ Special character processing, optionally
handled by CL-CD1400
■ Line break detection (start and end) and
generation
■ Insertion of transmit delays in data stream
■ One timer per channel for receiver
data timeout interrupt
■ 5..8 bits per character plus parity
■ Parity mode: odd, even, no or forced
■ Stop bits: 1, 1.5 or 2
Peripheral Connections
■ Via front panel on a shielded 25-pin D-Sub
receptacle connector
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D08, INTA, IDENT
Electrical Specifications
■ Isolation voltage:
■■ 500V DC between isolated and digital side
■■ 180V DC between the channels
■■ Voltage between the connector shield and
isolated ground is limited to 180V using a
varistor; AC coupling between conn. shield
and isolated ground through 47nF capacitor
■ Supply voltage/power consumption:
+5V (4.85V..5.25V), 700mA typ.
■ MTBF: 215,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 92g
Software Support
■ Windows NT driver
■ VxWorks driver
■ OS-9 SPF driver
8 RS232 Interfaces
■ 6 with 4 lines (2 modem control lines)
■ 2 with 6 lines (4 modem control lines)
2 CL-CD1400 Communication
Engines
■ Software programmable serial data rates up
to 135kbits/s full duplex on 4 channels
■ 12 bytes of FIFO for each transmitter/receiver
■ GOOD DATA interrupts eliminate the need
for character status check
■ Independent bit rate selections for transmit
and receive on each channel
■ Automatic flow control modes for
serial channels:
■■ XON/XOFF, RTS/CTS, DTR/DSR
■ Special character processing,
optionally handled by CL-CD1400
■ Line break detection (start and end)
and generation
■ Insertion of transmit delays in data stream
■ One timer per channel for receiver
data timeout interrupt
■ 5..8 bits per character plus parity
■ Parity mode: odd, even, no or forced
■ Stop bits: 1, 1.5 or 2
Peripheral Connections
■ Via front panel on a shielded 44-pin HD-Sub
receptacle connector
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D16, INTA, IDENT
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), 100mA typ.
■■ +12V (+11.5V..+15V), 80mA typ.
■■ -12V (-11.5V..-15V), 70mA typ.
■ MTBF: 70,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 98g
Environmental Specifications
■ Temperature range (operation): 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity range (oper.): max. 95% nc
■ Relative humidity range (stor.): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ Windows NT driver
■ VxWorks driver
■ OS-9 SPF driver
114
M-Module Mezzanine I/O
MEN M-Module Mezzanine I/O
M69 – Quadruple RS232 Interface
■ 4 RS232 interfaces
■ Intelligent asynchronous receivers/transmitters
■ Modem control lines
■ Receiver and transmitter FIFOs
■ CL-CD1400 Communications Engine
■ Optical isolation
■ 8 RS232 interfaces
■ Intelligent asynchronous receivers/transmitters
■ Modem control lines
■ Receiver and transmitter FIFOs
■ 2 CL-CD1400 Communications Engines
M45 – Octal RS232 Interface