Product data
Serial Communication Controller
■ 85C30-compatible via FPGA
■ Two channels with data transfer rates
up to 2Mbits/s full duplex per channel
■ 10 x 19-bit status FIFO
■ 14-bit byte counter
■ HDLC/SDLC protocol
■ Vector interrupt
Quadruple Asynchronous FIFO
Memory IDT7203
■ 2kB depth each direction
■ Asynchronous and simultaneous read
and write
Physical Interface
■ Front panel connectors:
■■ RS422
■■ Optically isolated
■ Rear I/O connector:
■■ TTL
■■ Not isolated
Peripheral Connections
■ Via front panel on two shielded 15-pin micro
D-Sub plug connectors
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D08, INTA, INTC, IDENT
Electrical Specifications
■ Isolation voltage:
■■ 180V DC between channel A and B
connectors
■■ 500V DC to the system
■■ Voltage between the connector shield and
isolated ground is limited to 180V using a
varistor; AC coupling between connector
shield and isolated ground through 47nF
capacitor
■ Supply voltage/power consumption:
+5V (4.85V..5.25V), 600mA typ.
■ MTBF: 285,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 82g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation):
max. 95% non-condensing
■ Relative humidity (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)
113
M-Module Mezzanine I/O
MEN M-Module Mezzanine I/O
M75 – Dual HDLC/SDLC Communication Controller
■ 2 full-duplex RS422 channels or
■ 2 half-duplex RS485 channels
■ 2 Mbits/s synchronous/asynchronous
per channel
■ Industry-standard 85C30
■ Optically isolated