Product data

CompactPCI Bus
3U CompactPCI CPU board
PICMG Spec. 2.0 R3.0 compliant
Up to 66MHz PCI frequency
64-bit/66-MHz CompactPCI system and
peripheral slot functionality
V(I/O): +3.3V or +5V (Universal Board)
CompactPCI hot-swap support
I2O message unit
CPU
PowerQUICC II (TM) MPC8260 @ 200 MHz
Memory
Level 1 Cache integrated in MPC8260
Up to 256MB optional SDRAM SO-DIMM
64 bits
16MB SDRAM on local bus
Up to 64MB on request
32 bits
8MB Flash
Up to 32MB on request
64 bits
4Kbit serial EEPROM
For factory settings
32KB CAM on request
Interfaces
Ethernet
Two FCC ports
10/100Base-T/TX
2 RJ45 connectors at front panel
COM1/COM2
Two SCC ports
For RS232 UART operation
2 RJ45 connectors at front panel
COM3/COM4 or Ethernet
Two SCC ports
For HDLC/SDLC/UART/Ethernet/Transparent
operation
Physical interface using SA-Adapter via
10-pin ribbon cable or COM extension
RS232..RS485, 10Base-T, isolated or not: for
free use in system (cable to front or back)
Additional ATM/Ethernet
One FCC port
Via COM extension adapter for ATM,
Ethernet 10/100Base-T/TX
Additional serial channels
Two multichannel controllers (MCC)
128 serial full-duplex data channels
(256x64kbps)
Via onboard COM extension adapters
Mass Storage
IDE interface
44-pin on-board connector for 1-mm
ribbon cable
CompactFlash (TM) interface (true IDE)
PXI
Eight trigger lines compliant with
PXI Specification
Miscellaneous
Hardware watchdog
Real-time clock
Temperature sensor
Hex switch for user settings and
33-MHz operation
User LEDs
Abort/reset buttons
Electrical Specifications
Supply voltage/power consumption:
+5V (4.85V..5.25V), 1200mA typ.
+3.3V (3.21V..3.45V), 620mA typ.
MTBF: 98,000h @ 50°C
Mechanical Specifications
Dimensions: conforming to CompactPCI
specification for 3U boards
Weight: 230g
Environmental Specifications
Temperature range (operation):
0..+60°C
Industrial temperature range
on request
Airflow: min. 10m
3
/h
Temperature range (storage):
-40..+85°C
Relative humidity range (operation):
max. 95% non-condensing
Relative humidity range (storage):
max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/0.33ms, 6g/6ms
Vibration: 1g/5..2,000Hz
Safety
PCB manufactured with a flammability
rating of 94V-0 by UL recognized
manufacturers
EMC
Tested according to
EN 55022 / 1999-05
(radio disturbance) and
EN 55024 / 1999-05 (immunity)
with regard to CE conformity
Software Support
MENMON
Linux
VxWorks
11
CompactPCI
MEN CompactPCI
PowerPC MPC8260/200MHz
1-slot 64-bit CompactPCI system or peripheral board
PXI system controller
256MB DRAM, CompactFlash
Dual 10/100MBit Fast Ethernet
4 SCC, 2 multichannel interfaces
1 FCC for COM extension (ATM, T1/E1, HDLC etc.)
Hot plug functionality
MENMON BIOS for PowerPC cards
F6 – 3U CompactPCI/PXI PowerPC Communication SBC