User manual

www.emaxmodel.com
SKYLINE32
5
In the above figure, the front of red arrow points to the head of the multirotor. The arrows in the small circles point to the
direction of motor rotation. Motor numbers are marked inside the circles and S1 stands for servo. Purple motors are top,
and blue circle are bottom.
Note: Configurations with more than 6 motors require CPPM receiver.
Aircraft assembly
Please install flight controller and ESC on your aircraft. Please refer to the instructions above for proper connection
of the SKYLINE32 to the ESC’s and receiver. Anti shock, anti-vibration mounting is recommended, preferably with
soft double-sided adhesive to increase the damping effect. Avoid vibration of gyro, to increase flight stability.
Parameter Adjustment Installation
1.Program driver installation:
Please install the driver program to your computer if you do not have it already.
1Please choose the compatible driver for your computer, link
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
(2) Install the driver program on your computer.
3Please switch the ESC switch to ON
4Connect flight controller to computer with Micro USB cable
5Follow steps to install the driver.
2. Install Configuration Software
1Please install Google chrome web browser.
2Open Google Chrome web browser, go to "Chrome Web Store" and search BaseFlight - Configurator.
3Add " BaseFlight - Configurator" App.
Note: Installing Cleanflight Configurator is similar to Baseflight Configurator, we will not discuss it in this manual