User manual

www.emaxmodel.com

SKYLINE32

11.Support OLED input

12. Onboard Micro-USB for setup and configuration.

13.Cleanflight configuration and Baseflight configuration GUI

14．GPS position hold / return to home

Note：SKYLINE32 hardware is compatible with NAZE32 firmware, including Baseflight and Cleanflight. Below are the

links to the source codes:

https://github.com/cleanflight/cleanflight

https://github.com/multiwii/baseflight

SKYLINE32 is loaded with Cleanflight-Configurator. The Cleanflight-Configurator GUI must be downladed from the

Chrome Extension store. Baseflight is another firmware option and requires the Baseflight GUI, also available form the

Chrome Extension Store. This manual will introduce basic instruction for these parameter adjusting software. For

more, kindly check:http://www.yinyanmodel.com/en/DownList.asp

Note: with firmware and configuration based on “MultiWii” software, the processor used is not Atmel AVR, and can not be

compiled via Arduino or other AVR tools. Below is some information about STM32 development:

http://code.google.com/p/afrodevices/wiki/STM32Development

Hardware And Connection

① Serial communication connector. Used for external serial communication, such as OSD module with serial

communication.

②

RC Input

（PWM/CPPM）/

Servo Output

GPS connector

Default pins order is (from top to bottom): GND，+5V，CH1-CH8. CH1-CH8 for channels: AIL，ELE，THR，RUD，

AUX1…AUX4.