Instructions

BLHeliSuite MultipleESC mode 14.3.0.2 and later ©4712

Indication of ESC with unequal parameter versions (EEprom Layout)

If ESC are found, where the EEprom Layout (Parameter set version) does not match with the Master ESC,

the following (or similar) dialog is shown:

Here ESC#2 has EEprom rev 19 (BLHeli 13.2) and is purple numbered (“2”).

“EEprom Layout different” marked ESC in a mixed scenario can be selected in “Multiple” and “Single”

mode. If a “Write Setup” is initiated for the arrangement, BLHeliSuite will ask user for transformation of

the parameters.

This dialog will also show up if one attempts to paste 14.3 parameters to a 13.2 ESC and vice versa.