Instructions

BLHeliSuite MultipleESC mode 14.3.0.2 and later ©4712
Use the right Mouse button to directly select the ESCs in “Single” mode.
To select multiple ESC at once: Select e.g. right-click “2” first and shift + left-click “4” to select 2,3, and 4.
Although ESC#5 and 6 where not detected with “Check”, they can be manually selected in “Single” mode
and are shown as “?”.
Copy and Paste of parameters
In “Single” mode a Copy button shows up. Clicking the button will copy the momentary settings as
shown into a kind of clipboard. If the button shows a green “Copy” the “clipboard” settings are in sync
to the current workspace (ESC # – Name is never considered in the copy/paste comparison. Motor
Direction and PPM Min/Center/Max Throttle are only considered if the sync option is turned on).
Hovering the mouse over the button shows the current clipboard content.
4