Instructions

BLHeliSuite MultipleESC mode 14.3.0.2 and later ©4712
Here ESC#3 is shown as “f”.
“f” marked ESC in a mixed scenario can only be selected in “Single” mode. If a “Read Setup” is initiated
for a “f” marked ESC, a flash confirmation dialog will show up.
m: Indication of ESC with unequal ESC modes (MAIN - TAIL - MULTI)
If ESC are found, where the mode (Main - Tail - Multi) does not match with the Master ESC, the following
(or similar) dialog is shown:
10