Use and Care Manual

EMAX
7 | P a g e
Lifting and Movement/Forklift
1. Make sure lift operator stays aware while moving the compressor.
2. Be sure to uncrate the compressor prior to movement. This will allow a visual reference for the
balance of the unit.
3. Be sure the load is secure and well balanced before moving the compressor.
4. Make sure the forks are fully engaged and level prior to lifting or moving the unit.
5. Keep the unit/load as low as possible while moving and refrain from quick changes in direction.
6. For all other forklift safety standards/regulations please reference OSHA 1910.178- Powered
industrial trucks.
General Lifting Information
1. Carefully inspect all lifting equipment and ensure it is in good condition. Rated capacity of lifting
equipment must exceed compressor weight. NEVER lift with under sized or damaged equipment.
2. If using lifting equipment, ensure all lifting points are in good condition and tighten any loose nuts or
bolts before lifting.
3. A sling MUST be used when moving the compressor with a helicopter or other airborne equipment.
Be sure to follow OSHA standards 1910 subpart N.
4. Use guide ropes or equivalent to prevent twisting or swinging of the compressor while it is in the air
and NEVER attempt to lift the unit in high winds. Keep compressor as low to the ground as possible.
5. Keep all persons away from the compressor when it is lifted. DO NOT allow persons under the
compressor while it is being lifted.
6. DO NOT use bolts or other hooks on individual components to move the compressor.
7. When moving and or placing the compressor ensure it is on/across a surface that can hold the
combined weight of the compressor and the loading equipment.
CAUTION: Compressors,
especially vertical units, are
exceptionally top heavy. Take
care when moving and do not
make fast or sudden moves
during transport.
WARNING: Do NOT operate the unit if damaged during shipping,
handling or use. Damage may result in bursting and may cause
injury to persons or property damage. If the unit is received with
damage, please contact customer support as soon as possible.