Use and Care Manual

EMAX
21 | P a g e
Warranty shall be voided under the following conditions: Exposing electrical components to rain
or water or installing the unit in a hostile environment such as acid vapors or any caustic or abrasive
matter that may be ingested into the pump or installing the unit in an enclosed area where lack of
cooling ventilation is present, such as in boiler or equipment rooms where the ambient air exceeds
100F.
Further exclusions include failure to fully and completely follow the guidelines set forth in the manual.
Of specific note is environments where fine dust is common, such as granite, marble or concrete
plants, the compressor MUST be installed in a separate area with its own dedicated ventilation.
FAILURE TO PROVIDE THIS DUST FREE OPERATING AREA VOIDS THE WARRANTY.
Parts used for warranty purposes must be supplied by original manufacturer. Warranty work should
be performed only by an approved technician. If any maintenance (other than routine maintenance) is
performed by a non-approved Technician, written pre-approval must be obtained from manufacturer,
to prevent voiding this warranty. Failure to fully comply with this warranty and fully comply with the
manual instructions will void this warranty.
The oil purchase and maintenance program are effective as of Jan.2020