Battery - Safety Data Sheet

Wet Flooded Lead-Acid Battery
Safety Data Sheet
according to Regulation (EU) 2015/830
EN (English)
9/13
Sulfuric acid (7664-93-9)
USA - OSHA
OSHA PEL (TWA) (mg/m³)
1 mg/m³
8.2. Exposure controls
Appropriate engineering controls
:
Mechanical ventilation is recommended. Emergency eye wash fountains and safety showers
should be available in the immediate vicinity of any potential exposure.
Personal protective equipment
:
Safety glasses. Gloves. Insufficient ventilation: wear respiratory protection.
Hand protection
:
Wear suitable gloves tested to EN374.
Eye protection
:
Chemical goggles or face shield with safety glasses. DIN EN 166
Skin and body protection
:
Wash contaminated clothing before reuse. IF ON SKIN: Wash with plenty of soap and water.
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory equipment. Wear a respirator
conforming to EN140 with Type A/P2 filter or better.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Liquid
Appearance
:
Off-white cloudy liquid with solid object.
Colour
:
No data available
Odour
:
No data available
Odour threshold
:
No data available
pH
:
< 1 (sulfuric acid)
Relative evaporation rate (butyl acetate=1)
:
No data available
Melting point
:
327,5 °C (Lead)
Freezing point
:
No data available
Boiling point
:
1740 °C (Lead at 1013hPa)
Flash point
:
Non-flammable
Auto-ignition temperature
:
No data available
Decomposition temperature
:
No data available
Flammability (solid, gas)
:
Not applicable
Vapour pressure
:
No data available
Vapour pressure at 50 °C
:
1,33 hPa (Lead at 373 °C)
Relative vapour density at 20 °C
:
No data available
Relative density
:
No data available
Density
:
11,34 g/m³ (Lead)
Solubility
:
Soluble in water.
Log Pow
:
No data available
Viscosity, kinematic
:
No data available
Viscosity, dynamic
:
No data available
Explosive properties
:
No data available
Oxidising properties
:
No data available
Explosive limits
:
No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
Stable under normal conditions.
10.2. Chemical stability
Stable at normal conditions.