Product Manual

Page 23
6.1 MAINTENANCE GUIDELINES
• Maintenance operations should be held only when the system is shut down
and fully depressurised
• Do not modify or change the control setings
• Use only approved replacement parts
• Always check connections against leakage
• Ensure all loose parts are removed and secured to the dryer before operation
6.2 DAILY CHECKS
Functional and visual checks are to be done daily. Ensure the Green power-on
led is illuminated.
• Check any external damages.
• If the service led (red led) appears, contact local distributor for Service.
• Remove the dust and dirt from the dryer. Clean all surfaces which are contaminated.
6.3 GENERAL SERVICE
A full product service is recommended every 2 years or 12.000 hours of operation
(whichever occurs first). Desiccant to be replaced. Valves and silencers are to be
checked and replaced if necessary.
Maintenance operations should only be
carried out by authorised personel
SECTION 6
MAINTENANCE
ıı
ııı
ııı