User Manual

MAINTENANCE AND TROUBLE SHOOTING P8
8. MAINTENANCE AND TROUBLE SHOOTING
Do not leave the ColorTouch control box directly under sunlight.
Before switching on the control box, check the circuit boxes are running properly.
Warranty will be voided if the Emaux ColorTouch control box was dismantled by
unauthorized personnel.
Trouble
Possible Solution
Touch remote without response on
Pool light
The handset mode display correct but
there is no response on Pool light
The control box works normally, but
pool light not response.
The ColorTouch box is not work.
Replace battery CR2032.May enter
water to damage remote.
The remote handset is relearned by the
learn key of control box.
Check transformer. Replace pool light
panel.
Check main power button.
Check connected locations of the cable.
Check fuses at switch board.
Contact qualified electrician to test.
7. COLOR TOUCH WIFI CONNECTION
The latest Color Touch control box armed with WIFI access function from your
home router. Therefore, you can control the E-lumen X lamp color, brightness,
ON/OFF and etc same as remote handset.
1. The Android app can be download from Android marketplace.
2. Install the apps as usual and below icon will be shown on screen when
installation finished.
3. Open your cell phone WIFI setting and connect to SSID “ColorTouch” with
password 12345678.
4. Enter the APP, control the E-lumen X/ E-Lumen lamp color, brightness, ON/OFF
and etc same as remote handset
Wrong color mode.
Switch to 50Hz/60Hz, wait 30s to open
control box.
APP Download