User Manual

Table Of Contents

COLORTOUCH REMOTE HANDSET P6

6. COLORTOUCH REMOTE HANDSET

Each Each control box is associated with a ColorTouch remote handset. It

needs to pair the control box and hadset by learning process as below:

6.1 LEARNING PROCESS OF REMOTE

Switch off main power button of the box before pressing the learn key of the box.

Then switch on main power button and pressing the Learn Key locate under the

box,the Learn key display is flashing in white color.

While keep pressing Learn Key of the box, pressing any key on the ColorTouch

remote. When success link, the mode display on the remote (Emaux Water drop

‘e’) will be in red color and Learn Key display in the box is out .

If there is one remote for multiple control box, repeat the learning process to

each control box.

6.2 THE REMOTE HANDSET

There are two operation mode to support Colortouch mode and basic

tradition mode for lighting control.

6. RESET Button - Press the button to reset all the pool lights connected to Z1 &

Z1 to cool white color.