User Manual

4. INSTALLATION
1. Remove the mounting bracket from the control box,
position the mounting bracket to the desired fitting
place and mark on the wall with the location of the
drilled holes.
2. Then drill 4 holes of ø8mm on the marked position
and insert a plastic fitting, Secure the mounting
bracket by fastening 4 screws of M5x35 to the
plastic fittings as figure.
3. The ColorTouch control box is hanged on the hook of
mounting bracket, and secure the bottom screw.
INSTALLATION P4
CONTROL BOX DISPLAY AND FUNCTION KEYS
Remote Handset
Reset Button
All Button
Z2 Button
Z1 Button
Main Power Switch
Power Cord
Zone 2 Output
Zone 1 Output
Learn key
Lean key Display
Standby ON/OFF Button
Color Wheel
Battery Compartment
RESET
Z1
Z2
ALL(Z1+Z2)
Brightness
Mode Display