Specifications

11
English
SAFETY PRECAUTIONS
General Power Tool Safety Warnings
WARNING - Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety1)
Keep work area clean and well lit.a) Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, b)
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a c)
power tool (Fig.4, page 18). Distractions can cause you to lose
control.
Electrical safety2)
Power tool plugs must match the outlet. Never modify a)
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, b)
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions (Fig.6, c)
page 19). Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying, d)
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension e)
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is f)
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety3)
Stay alert, watch what you are doing and use common a)
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication (Fig.1, page 18). A moment of
inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye b)
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in c)
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the d)
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance e)
at all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. f)
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
If devices are provided for the connection of dust g)
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can
reduce dust-related hazards.
Power tool use and care4)
Do not force the power tool. Use the correct power tool for a)
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it b)
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the c)
battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools
(Fig.2, page18). Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children and do d)
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding e)
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean.f) Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
Use the power tool, accessories and tool bits etc. in g)
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations different from those intended
could result in a hazardous situation.
Service5)
Have your power tool serviced by a qualified repair a)
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Chain saw safety warnings:
Keep all parts of the body away from the saw chain when the •
chain saw is operating. Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chain saws may cause entanglement of
your clothing or body with the saw chain.
Always hold the chain saw with your right hand on the rear •
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand configuration increases the risk of
personal injury and should never be done.
Hold power tool by insulated gripping surfaces, when •
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessories
contacting a “live” wire may make exposed metal parts of he power
tool “live” and could give the operator an electric shock.
Wear safety glasses and hearing protection. Further •
protective equipment for head, hands, legs and feet is
recommended. Adequate protective clothing will reduce personal
injury by flying debris or accidental contact with the saw chain.
Do not operate a chain saw in a tree. • Operation of a chain saw
while up in a tree may result in personal injury.
Always keep proper footing and operate the chain saw only •
when standing on fixed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chain saw.
When cutting a limb that is under tension be alert for spring •
back. When the tension in the wood fibres is released the spring
loaded limb may strike the operator and/or throw the chain saw out
of control.
Use extreme caution when cutting brush and saplings.
• The
slender material may catch the saw chain and be whipped toward
you or pull you off balance.
Carry the chain saw by the front handle with the chain saw •
switched off and away from your body. When transporting
or storing the chain saw always fit the guide bar cover. Proper
handling of the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
Follow instructions for lubricating, chain tensioning and •
changing accessories. Improperly tensioned or lubricated chain
may either break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and grease. • Greasy,
oily handles are slippery causing loss of control.
Cut wood only. Do not use chain saw for purposes not •
intended. For example: do not use chain saw for cutting
plastic, masonry or non-wood building materials. Use of the
chain saw for operations different than intended could result in a
hazardous situation.