Owner`s manual

First Time Charge of the Battery Pack

1. Open the battery compartment and slide the battery pack in with arrow pointing downwards. (Figure 1)

2. Attach the power lead from the unit to the battery.

NOTE: The power lead connector ﬁ ts the Digital Wallet connector only one way. Do not force-ﬁ t. If the

connectors do not ﬁ t together easily, be sure they are positioned properly.

3. Close the battery compartment door.

5. Connect the AC Adapter to a power outlet and then to the Carry Dock.

6. Connect the Carry Dock to the Digital Wallet. (Figure 1)

7. Digital Wallet should automatically power on.

8. You will notice the battery level status icon, in the lower left corner of the screen, will be empty. Charge the battery fully for

3 hours prior to ﬁ rst self-powered use.

NOTE: The battery pack cannot be fully charged when it is cold. Charge the battery pack in a temperate

zone between 32º and 104º F (0º and 40º C). If recharged above 104º F (40º C), the battery pack could

permanently lose its ability to recharge.

5 Installation Guide