Owner`s manual

We are always adding new features and enhancements to the Digital Wallet. Check www.mindsatwork.net

periodically for new ﬁ rmware updates.

1. Connect Digital Wallet to your computer and power on with AC Adapter.

2. Visit http://www.mindsatwork.net/msdownloads.htm.

3. Download the ﬁ rmware update to your Digital Wallet hard disk. The ﬁ le name will be M$A$W.M$S. Do not place this ﬁ le in

any folder. If your computer prompts you to conﬁ rm whether or not to replace the existing ﬁ le, select “Yes”.

4. Eject the Digital Wallet drive and disconnect the USB cable. In the Main Menu, select “Check Hard Disk” to check that

the ﬁ le “M$A$W.M$S” is in the directory.

5. Disconnect the AC Adapter and completely Power off the unit. This order of operations must be followed exactly in order

for the update to take effect.

6. Plug the AC Adapter back in. (This operation must be done under AC Power.) Be sure the USB cable is not

connected to the Carry Dock. The Minds@Work Logo will appear, followed by the Digital Wallet logo. The unit will show these

two screens twice, signifying the update is taking place.

7. When the Main Menu appears, scroll down to “CUSTOMIZE” and press Select. (Figure 3.A)

8. In the next menu, scroll down to “VERSION” and press Select. (Figure 3.X) Check the version number to verify that your

ﬁ rmware was updated with the latest version. You have completed the update.

NOTE: If the update was successful, your hard disk directory will no longer show the ﬁ le M$A$W.M$S.

UPDATING THE DIGITAL WALLET FIRMWARE

28 Updating the Digital Wallet Firmware