Owner`s manual

Transfer Process
- The countdown status meter displayed during memory card downloads is an estimated amount of the time needed to complete the
transfer. File size, manufacture make and fragmentation of the hard disk and memory card can cause transfer time to vary.
- Make sure the memory card is inserted right-side up into the adapter, especially when handling SmartMedia cards.
- Always carefully insert and remove the memory card from the PC card adapter.
- A fl ashing light bulb designates that data is in the transfer process. Until the light bulb has ceased to fl ash, do not:
1. Disconnect the Digital Wallet from the computer
2. Remove the PC card adapter from the PC card slot
If these procedures are not followed, there may be a chance of lost or corrupt data.
- Do not use force when connecting the USB cable. The design of the cable connectors and the Digital Wallet USB port prevents
misconnection.
Care for Hard Disk
- If the unit or buttons become inoperable, depress the reset button located on the back of the unit.
- You will fi nd the fi le “M$A$W$.S$N” on the Digital Wallet hard disk. This fi le can be deleted at any time and will not
be harmed during reformatting. Being that it is a related operating fi le, it will always be regenerated once the Digital Wallet
is powered on again.
- Check the Minds@Work website periodically for free fi rmware updates.
- To keep your hard drive in peak operating performance, you are advised to periodically run ScanDisk and Disk Defragmenter
(PC users) or reformat the hard drive (Mac & PC users). Without regular maintenance, transfer times will be considerably slower.
8 Caring for the Digital Wallet