Installation guide

8 ZENworks 11 Server Installation Guide
Operating
System
Windows:
 Windows Server 2003 R2
SP2 x86, x86_64 (Enterprise
and Standard editions)
 Windows Server 2003 SP2
x86, x86_64 (Enterprise and
Standard editions)
 Windows Server 2008 SP1 /
SP2 x86, x86_64 (Enterprise
and Standard editions)
 Windows Server 2008 R2
x86_64 (Enterprise and
Standard editions)
 Windows Server 2008 R2
SP1 x86_64 (Enterprise and
Standard editions)
Linux:
 SUSE Linux Enterprise
Server 10 (SLES 10) x86,
x86_64 (Intel and AMD
Opteron processors)
 Open Enterprise Server 2
(OES 2) SP2 / SP3 x86,
x86_64
 SLES 11 SP1 / SP2 x86,
x86_64 (Intel and AMD
Opteron processors)
 Red Hat Enterprise Linux 5.5
x86, x86_64
All the Core and Data Center Editions of Windows
Server 2003 and Windows Server 2008 are not
supported as Primary Server platforms. Windows
Server 2008 Core is not supported because it does
not support the .NET Framework.
ZENworks 11 Configuration Management is
supported on Windows Server 2003 and Windows
Server 2008 editions with or without Hyper-V.
Before you install a ZENworks Server on a SLES 11
x86_64 device, you must ensure that pam-32 bit
libraries are installed on the device because the CASA
rpms are dependent on these libraries.
To install pam-32 bit libraries:
1. Log in to the Linux device as the
root user.
2. Insert the Linux installation media.
3. Run Yast to open the YaST Control Center.
4. Click Software > Software Management.
5. In the Search option, specify CASA and click OK
to list all the CASA packages.
6. Select the pam-32 package and click Install >
Apply.
NOTE: Installation on a server in a clustered
environment is not supported.
IMPORTANT: Open Enterprise Server and all x86
(32-bit) operating systems will not be supported
ZENworks Primary Server platforms in ZENworks 11
SP3.
Processor Minimum:
If the Primary Server is running
Patch Management, we
recommend a fast processor, such
as the Intel Core Duo processor.
RAM 2 GB minimum; 4 GB
recommended
Item Requirements Additional Details