Installation guide

74 ZENworks 11 Server Installation Guide
7 Enter the username of the zone administrator.
To use the default username (Administrator), press Enter.
8 Enter the zone administrator’s password.
9 (Conditional) If the Linux Satellite has the Imaging role configured, you are prompted to retain
the images after the uninstallation. To retain the images, press Enter.
10 Review the summary, then press Enter to begin the uninstallation.
The ZENworks uninstallation program perform the following actions:
 Removes all the Satellite roles from the device.
 Removes the entry for the device from ZENworks Control Center (Configuration tab >
Server Hierarchy panel).
11 Ensure that the Satellite roles have been removed from the device by running the zac satr
command.
12 (Conditional) If you want to uninstall the agent and unregister the device from the zone, continue
with “Uninstalling the ZENworks Adaptive Agent and Unregistering the Device from the Zone” on
page 74.
Uninstalling the ZENworks Adaptive Agent and Unregistering the
Device from the Zone
Perform the following steps to remove a Linux managed device from the Management Zone and
uninstall the ZENworks Adaptive Agent from it.
1 At the Linux Satellite console prompt, relaunch the uninstallation program by entering /opt/
novell/zenworks/bin/novell-zenworks-xplat-uninstall
.
2 Choose the locale (language) in which you prefer to run the uninstallation program by entering
the locale number.
To select the default locale (English), enter
2 or press Enter.
TIP: Pressing Enter at any prompt causes the uninstallation program to accept the default, which
is the value shown in parentheses.
3 Read the introductory text, then press Enter.
4 On the Uninstallation Type screen, select the Unregister and Uninstall From Zone option by
pressing Enter.
5 On the ZENworks Management Zone Information screen, enter the IP address of the Primary
Server to which the Linux Satellite is registered.
6 Enter the port number on which the Primary Server is listening.
To select the default port 443, press Enter.
7 Enter the username of the zone administrator.
To use the default username (Administrator), press Enter.
8 Enter the zone administrator’s password.
9 Review the summary, then press Enter to begin the uninstallation.
ZENworks uninstallation program performs the following actions:
 Uninstalls ZENworks Adaptive Agent.