Installation guide

62 ZENworks 11 Server Installation Guide
5 Click Browse to browse for and select novell-pbserv.exe .
All the Imaging applications including
novell-pbserv.exe are located in the
zenworks_installation_directory\novell\zenworks\bin\preboot directory
6 Click OK.
novell-pbserv.exe is added to the Programs and Services list and is automatically enabled.
7 Repeat Step 4 through Step 6 to add the following Imaging applications to the Exceptions list:

novell-proxydhcp.exe
 novell-tftp.exe
 novell-zmgprebootpolicy.exe
8 Click OK.
Adding Imaging Applications as Exceptions to Firewall on Windows
Server 2008
1 From the desktop Start menu, click Settings > Control Panel.
2 Double-click Windows Firewall.
The Windows Firewall window is displayed.
3 In the left pane, click Allow a program or feature through Windows Firewall.
4 Click the Exceptions tab.
5 Click Add Program.
The Add a Program window is displayed.
6 Click Browse to browse for and select novell-pbserv.exe .
All the Imaging applications including
novell-pbserv.exe are located in the
zenworks_installation_directory\novell\zenworks\bin\preboot directory
7 Click OK.
novell-pbserv.exe is added to the Programs and Services list and is automatically enabled.
8 Repeat Step 5 through Step 7 to add the following Imaging applications to the Exceptions list:

novell-proxydhcp.exe
 novell-tftp.exe
 novell-zmgprebootpolicy.exe
9 Click OK.
NOTE
After installing the server on Linux device,
/opt/novell/zenworks/bin is not added to the PATH
variable and hence the commands in that directory cannot be used directly. Do any of the following on
the Linux device to run the commands from
/opt/novell/zenworks/bin :
 Relogin to the device.
 Specify the complete path to access the command.
For example: /opt/novell/zenworks/bin/zac