Installation guide

30 ZENworks 11 Server Installation Guide
In ZENworks Control Center, the devices appear in the \Servers folder or the \Workstation
folder on the Devices page.
3 Create a folder in the \Servers folder or the \Workstation folder on the Devices page.
For more information on how to create a folder, see “Creating a Folder” in the ZENworks 11 SP2
Administration Quick Start.
4 Move all the devices on which the ZENworks 11 Adaptive Agent is deployed to the folder you
just created in the
\Servers folder or the \Workstation folder.
5 Override the Management Zone setting at the folder level:
5a Click Devices.
5b Click the folder you created in Step 3, where you placed all of the devices.
5c Click Details next to the folder name to display the folder’s details.
5d Click Settings > Device Management > ZENworks Agent.
5e Click Override settings.
5f In the Agent Features panel, select the Installed and Enabled option next to the
Configuration Management or Endpoint Security Management Agent features.
5g Click Apply.
6 Before deploying the ZENworks 11 Adaptive Agent, you must configure the ZENworks 11
Configuration Management and ZENworks 11 Endpoint Security Management Agent features
not to be installed:
6a In ZENworks Control Center, click Configuration.
6b In the Management Zone Settings panel, click Device Management, then click ZENworks
Agent.
6c In the Agent Features panel, select the Installed and Enabled option next to the Patch
Management and Asset Management Agent features
6d Deselect the Installed option next to the Configuration Management and Endpoint Security
Management Agent features.
6e Click Apply.
7 Deploy the ZENworks 11 Adaptive Agent on ZDM 7 managed devices.
For more information on how to deploy the ZENworks Adaptive Agent, see “Deploying the
ZENworks Adaptive Agent” in the ZENworks 11 Discovery, Deployment, and Retirement
Reference
In ZENworks Control Center, the devices appear in the
\Servers folder or the \Workstation
folder on the Devices page.
2.2 ZENworks Asset Management
The following information applies to ZENworks 11 coexistence with ZENworks 7.5 Asset
Management (ZAM 7.5):
 Server Coexistence: There are no known coexistence issues. For performance reasons,
however, we recommend that you do not install a ZENworks 11 Server on the same network
server as a ZAM 7.5 Server.
 Agent Coexistence Beginning with ZAM 7.5 IR19, the ZENworks 11 Adaptive Agent (including
the Inventory-Only Agent) and ZAM 7.5 client can coexist.