Installation guide

Coexistence with Other ZENworks Products 29
3 Deploy the ZENworks 11 Adaptive Agent on the ZDM 7 managed devices.
For more information on how to deploy the ZENworks Adaptive Agent, see “Deploying the
ZENworks Adaptive Agent” in the ZENworks 11 Discovery, Deployment, and Retirement
Reference.
In ZENworks Control Center, the devices appear in the
\Servers
folder or the
\Workstation
folder on the Devices page.
4 Create a folder in the
\Servers
folder or the
\Workstation
folder on the Devices page.
For more information on how to create a folder, see “Creating a Folder” in the ZENworks 11 SP2
Administration Quick Start.
5 Move all the devices on which the ZENworks 11 Adaptive Agent is deployed to the folder you
just created in the
\Servers
folder or the
\Workstation
folder.
6 Override the Management Zone setting at the folder level:
6a Click Devices.
6b Click the folder you created in Step 4, where you placed all of the devices.
6c Click Details next to the folder name to display the folder’s details.
6d Click Settings > Device Management > ZENworks Agent.
6e Click Override settings.
6f Click Apply.
7 Install the ZENworks 11 Configuration Management or ZENworks 11 Endpoint Security
Management Agent features:
7a In ZENworks Control Center, click Configuration.
7b In the Management Zone Settings panel, click Device Management, then click ZENworks
Agent.
7c In the Agent Features panel, select the Installed and Enabled option next to the
Configuration Management or Endpoint Security Management Agent features.
7d Click Apply.
8 Deploy the ZENworks 11 Adaptive Agent on devices managed exclusively by ZENworks 11 .
For more information on how to deploy the ZENworks Adaptive Agent, see “Deploying the
ZENworks Adaptive Agent” in the ZENworks 11 Discovery, Deployment, and Retirement
Reference.
In ZENworks Control Center, the devices appear in the
\Servers
folder or the
\Workstation
folder on the Devices page.
Method 2
If you have fewer devices managed exclusively by ZENworks 11 than devices managed by ZDM 7,
you must perform the following tasks to achieve ZENworks 11 and ZDM 7 coexistence:
1 Activate all of the products by providing valid product license keys during the installation of
ZENworks 11 .
For more information on how to activate a product license key, see “Performing the Installation”
on page 47.
2 Deploy the ZENworks 11 Adaptive Agent on devices.
For more information on how to deploy the ZENworks Adaptive Agent, see “Deploying the
ZENworks Adaptive Agent” in the ZENworks 11 Discovery, Deployment, and Retirement
Reference.