Installation guide

14 ZENworks 11 Server Installation Guide
Table 1-2 Windows Managed Device Requirements
Item Requirements Additional Details
Operating System:
Windows Servers
 Windows Server 2003 R2 SP2
x86, x86_64 (Enterprise and
Standard editions)
 Windows Server 2003 SP2 x86,
x86_64 (Enterprise and Standard
editions)
 Windows Server 2008 SP1 / SP2
x86, x86_64 (Enterprise and
Standard editions)
 Windows Server 2008 R2 x86_64
(Enterprise and Standard
editions)
 Windows Server 2008 R2 SP1
(Enterprise and Standard
editions)
All the Core Editions of Windows Server
2003 and Windows Server 2008 are not
supported as a managed device platform
because they do not support the .NET
Framework.
ZENworks 11 Configuration Management
is supported on Windows Server 2003
and Windows Server 2008 editions with or
without Hyper-V.
Operating System:
Windows
Workstations
 Embedded XP SP2 / SP3 x86
 Windows Vista SP2 x86, x86_64
(Business, Ultimate, and
Enterprise versions only; Home
versions are not supported)
 Embedded Vista SP1 / SP2
 Windows XP Professional SP2 /
SP3 x86
 Windows XP Tablet PC Edition
SP3 x86
 Windows 7 x86, x86_64
(Professional, Ultimate, and
Enterprise editions)
 Windows 7 SP1 x86, x86-64
(Professional, Ultimate, and
Enterprise editions)
A managed device name must not exceed
32 characters. If a device name exceeds
32 characters, that device is not
inventoried. In addition, make sure that
the device name is unique so that the
device is recognized appropriately in the
inventory reports.
Prerequisite for installing POSReady 2009
(XP): For installing an agent on
POSReady you must install the
cacls.exe comand line tool and it
needs to be enabled from the add or
remove components. To enable cacls.exe
command line tool, see Microsoft
Network.