Installation guide

12 ZENworks 11 Server Installation Guide
2645 Used for CASA authentication. Opening this port
allows ZENworks to manage devices outside of the
firewall. It is a good practice to make sure that the
network is configured to always allow communication
on this port between the ZENworks Server and
ZENworks Agents on managed devices.
5550 Used by Remote Management Listener by default.You
can change this port in the Remote Management
Listener dialog box in ZENworks Control Center.
Remote Management is used only with ZENworks
Configuration Management.
5750 Used by Remote Management proxy.
Remote Management is used only with ZENworks
Configuration Management.
5950 Used by Remote Management service by default. You
can change this port in the Remote Management
Settings panel of the Remote Management
Configuration page in ZENworks Control Center.
Remote Management is used only with ZENworks
Configuration Management.
7628 Used by the Adaptive Agent for Quick Tasks.
8005 Used by Tomcat to listen to shutdown requests. This is
a local port, and cannot be accessed remotely.
8009 Used by Tomcat AJP connector.
9971 Used by AMT Hello Listener to discover the Intel AMT
devices.
Firewall
Settings:
UDP Ports
67 Used by proxy DHCP when it is not running on the
same device as the DHCP server.
69 Used by the Imaging TFTP, but will not work across
firewall because it opens random UDP port for each
PXE device.
The Imaging TFTP is used only with ZENworks
Configuration Management.
997 Used by the Imaging Server for multicasting.
The Imaging Server is used only with ZENworks
Configuration Management.
998 Used by the Preboot Server (novell-pbserv).
The Preboot Server (novell-pbserv) is used only with
ZENworks Configuration Management.
1761 Port 1761 on the router is used to forward subnet-
oriented broadcast magic packets for Wake-On-LAN.
Item Requirements Additional Details