Owner's Manual

English

Note: * Actual product specifications may vary.

If you prefer to set the boot priority for long-term use, you should select the

Boot submenu.

1 Turn on your computer and insert the first system recovery disc into the

optical disc drive. Restart your computer.

2 During startup when the eMachines logo shows, press the F2 key to enter

BIOS Setup, where you can set system parameters.

3 Use the left and right arrow keys to select the Boot submenu.

4 Use the up and down arrow keys to select the optical drive device.

5 Use the F6 key to move the optical drive device to the highest boot

priority, or use the F5 key to move other devices to a lower boot priority.

Ensure that the optical drive device is the highest priority.