Use and Care Manual

ManualsBrandsEMAC ManualsFlooringNovoescocia S matt Silver 3/8 in. x 98-1/2 in. Aluminum Tile Edging Trim

TECHNICAL DATA SHEET

R03.002_24/01/2023

Mini scotia with reduced face side, which makes easier the cleaning

of difcult areas and avoids the accumulation of germs. The

technology applied on the surface of some nishes protects against

harmful organisms such as molds, fungi and bacteria. It is easy to

install and it’s ideal both installations with high levels of hygiene and

cleaning and houses. Available in a range of colours.

Novoescocia® S

with technology of control of microbial deterioration

Applications

1/4

Scope of Novoescocia® S:

- Corners between wall and kitchen counter

- Perimeters in shower trays or bathtubes

- Wall-oor, wall-wall or wall-ceiling joints, horizontally and vertically

It’s ideal for bathrooms, kitchens, medical consultations, restaurants, etc...

Its design is versatile and is appropriate for homes, ofces, public buildings or installations with high

requirements of hygiene and cleaning.

Summary of content (4 pages)

PAGE 1
TECHNICAL DATA SHEET Novoescocia® S with technology of control of microbial deterioration Mini scotia with reduced face side, which makes easier the cleaning of difficult areas and avoids the accumulation of germs. The technology applied on the surface of some finishes protects against harmful organisms such as molds, fungi and bacteria. It is easy to install and it’s ideal both installations with high levels of hygiene and cleaning and houses. Available in a range of colours.
PAGE 2
TECHNICAL DATA SHEET Novoescocia® S General Features Material: Aluminium Length: 8ft2in / 2,5 m.l. Dimensions: h: 3/8”-1/2” / 10, 12 mm. a: 3/8” / 10 mm. Packaging: 30 u/box Finishes: 119 - Antibact. bright white 136 - Antibact. matt white 13 - Matt silver Complementary pieces Novoescocia® S has complementary pieces available ,made in Zamak, to achieve a perfect finish. Exterior angle Interior angle Cover Materials Aluminium Novoescocia® S is a profile made by extrusion of aluminium.
PAGE 3
TECHNICAL DATA SHEET Novoescocia® S Stain resistance. Kitchen furniture. Not work surfaces. Superficial resistance to typical kitchen cleaning products. Unchanged. Stain resistance. Bath furniture. Fronts. Superficial resistance to typical bathroom cleaning products. Unchanged. Surface resistance to staining Unchanged. UNE56842:2001 AIDIMA UNE 56867:2002 UNE EN 4382:2005 Apdo.
PAGE 4
TECHNICAL DATA SHEET Novoescocia® S Cleaning and maintenance The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry it to remove the humidity excess. The persistent dirtiness can be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder neutral.