Product Brochure

TECHNICAL DATA SHEET
R03.003_08/03/2021
Emac Complementos S.L. (Spain) [e-mail] // Emac America L.L.C. (FL,USA) [e-mail] // Emac Italia S.R.L. (Italy) [e-mail]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [e-mail].
Technical information
Novoescocia® 4 Aluminum
Indoors Recyclable
Page 3 of 3
Technical features and Tests
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Abrasion resistance*: Very good
Lightfastness*:
Excellent
Appearance and color*: EN 12373-1
Bacterial growth resis-
tance
Reduction of bacterial growth in +99%
Reduction of magnitude of population >2.5
*Anodized aluminum
Installation
1 2 3
4
Please, clean the surface destinated to the installation of Novoescocia® 4 aluminum:
1. Cover generously the back face of Novoescocia® 4 aluminum with an adhesive type silicone
2. Fill also the posterior cavity with the same adhesive to ensure a perfect sealing and good grip.
3. Place the Novoescocia® 4 aluminum on the corner and press rmly ensuring a good contact
between both surface
4. Finally clean the remaining material and let dry.
* In humid environments or in direct touch with water, it is recommended to seal the joints between
Novoescocia® with silicones.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
Cleaning and maintenance
The cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture. If dirtiness persists, clean the
prole with a solution with clean water and detergent or neutral soap 5%, brushing with a cloth that
has no particles that could scracht the nish. Ensure the lacquered surface is totally cold (maximum
20ºC) before the cleaning.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Wall tiling