Installation Guide

FICHA TÉCNICA

TECHNICAL FILE

R03.001_21/01/2016

Prole made of anodized aluminium intended to be installed as

an edge protector. Its main function is to protect and decorate the

edges of tiled walls, avoiding possible miter cuts.

Its cross shape geometry creates a visual and modern effect with

simple lines. This prole integrates perfectly into the installation and

is very easy to clean. Available in anodized nishes which t with

the most trendy ceramics.

NovoPilastra

Applications

Page 1 of 3

The Novopilastra prole is intended to be installed mainly as a

protector in vertical edges of ceramic installations.

As alternative, is also an excellent option when placed in horizontal

edges as countertop nish.

PAGE 1
TECHNICAL FICHA TÉCNICAFILE NovoPilastra Profile made of anodized aluminium intended to be installed as an edge protector. Its main function is to protect and decorate the edges of tiled walls, avoiding possible miter cuts. Its cross shape geometry creates a visual and modern effect with simple lines. This profile integrates perfectly into the installation and is very easy to clean. Available in anodized finishes which fit with the most trendy ceramics.
PAGE 2
TECHNICAL FICHA TÉCNICAFILE Novopilastra General Features Material: Natural/anodized aluminium Lenght: 2,5 lm (8.
PAGE 3
TECHNICAL FILE Novopilastra Cleaning and maintenance The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry it to remove the humidity excess. The persistent dirtiness can be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder neutral.