Manualshelf

Installation Guide

ManualsBrandsEmac ManualsFloor Installation ToolsNovolistel Maxi Wood 1/2 in. x 98-1/2 in. Composite Tile Edging Trim
1234
R03.001_12/05/2011
TECHNICAL FILE
Novolistel® Maxi
As a listello or
medium height nish
Maxi
Materials
Installation
1
2 3 4
Page 2 of 4
1. First, tile one of the two walls. Then, spread a big amount of thin-set mortar on the other wall to be
tiled.
2. Place the Novolistel® on the corner and press it so the thin-set mortar could pass through the holes
of the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to get an optimal adhesion.
4. Continue tiling until the installation is nished.
5. Clean the remaining material and let dry.
1
2
3
4
5
As an edge protector
Maxi is a composite material made of PVC and vegetable bers. Those bers proceed from the recycling
of organic waste from agriculture. The waste reduction and the recycling of materials, help Maxi to fulll
with the Emac®’s commitment with the Environment and the sustainable construction.
Maxi has an original nish, similar to wood and natural elements, which adapts to different decorative
environments. The main advantage of this composite is that has the best qualities of PVC and vegetable
bers such as good mechanic strenght, abrasion resistance and dimensional stability among others.
1. Spread a big amount of thin-set mortar on the surface to be tiled and tile it up to the approximated
height where you’ll place the listello.
2. Place the tiles in the end of the next row, aligning them with previous tiles. Then place the prole
aligned to them, embedding the anchoring wing between the wall and the tiles. Press softly so the thin-
set mortar could pass through the holes of the anchoring wing.
3. Place the remaining tiles, pressing softly to achieve an optimal adhesion.
4. Then, continue tiling the wall up to the desired height.
5. Finally, clean the remaining material and let dry.
* If you want to install this prole as a medium height nish, spread thin-set mortar only in the area to be tiled and follow the
instructions until step 3.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.