Specification

R03.001_11/01/2012
TECHNICAL FILE
Novosuelo/ Novopared Aluminium
Installation
Page 2 of 3
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the Novosuelo/Novopared on the corner and press to let the thin-set mortar pass through
the holes of the anchoring wing.Coloque el Novosuelo/Novopared sobre el ángulo y presione para
que el material de agarre pase a través de los agujeros mecanizados del ala de jación.
3. Place tiles along the anchoring wing and then press them softly to get an optimal adhesion.
4. Continue tiling until the installation is nished
5. Clean the possible leftover and let dry.
Walls
Floors
1 2 3 4 5
1
2
3
4 5
Materials
To visualize the video, capture
this image with your mobile
(QR code reader software is
required) or just click on it.
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Then, place the prole and press it to let the thin-set mortar pass through the holes on the anchoring
wing.
3. Place a tile on the anchoring wing of the prole and press to get an optimal contact with the thin-
set mortar.
4. Repeat the previous step placing tiles along the prole until the installation is nished. Before
curing, tap with a rubber hammer to align the prole with the pavement.
5. Finally clean the leftover material and let dry.
6. * If you are going to polish the ooring, you must install the prole slightly below the tile to avoid possible damages.
To visualize the video, capture
this image with your mobile
(QR code reader software is
required) or just click on it.
Aluminium
Novosuelo/novopared aluminium is a prole made by extrusion of aluminum. Anodizing improves the
corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal Quala-
nod, which guarantees the quality of the process and the resulting proles. This seal regulates several
tests: appearance and color, thickness measurements, sealing and impregnation control, abrasion re-
sistance, lightfastness, acetic saline chamber and nitric acid immersion.
The lacquered nishes have a high quality and homogeneus surface. The lacquering has the quality
seal Qualicoat, which guarantees the quality of the process and the nal products.
The natural nish has no surface treatment so is less resistant to corrosion and scratching. It is not
recommended installing natural nishes without the application of an additional protection.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable