Installation Guide

ManualsBrandsEmac ManualsFloor Installation ToolsNovolistel 3 Matt Black 1/2 in. x 98-1/2 in. Aluminum Tile Edging Trim

TECHNICAL FILE

R03.001_10/09/2012

Prole with squared section, made of aluminum , designed to be

installed as a decorative listello, a oor separator or as a stair nosing,

among others. This prole is easy to install during the tile work and

protects the edges of ceramic installations. It is available in high quality

anodized and lacquered colors and also in exclusive ranges of color

such as the exclusive Sensations range or with antibacterial properties

for the sanitary and health establishments.

Novolistel® 3

Aluminum

Material:

Anodized aluminum

Lacquered aluminum

Natural aluminum

Length: 8’2” / 2,5 l.m.

Dimensions:

h: 5/16”*, 3/8”, 1/2”

8*,10,12 mm.

*only some nishes

a: 3/8” / 10 mm.

Packaging: 30 u/box

Finishes:

Natural

Anodizing: matt and mirror silver,

matt/mirror-bright gold, brushed

mirror-bright, matt/mirror-bright

black, matt copper, matt bronze,

brushed metal

Lacquered: white, matt graphite

Sensations range

Antibacterial range

Applications

Technical Features and Tests

General Features

Page 1 of 4

Novolistel® 3 is the most versatile prole in the markets. It can be installed as:

- Decorative listello

- Edge protector

- Flooring separator*

- Stair nosing* or nishing edge (countertops, frame...)

*The lacquered nishes are not recommended to be installed in oorings

Reg. 0504253-6

*Anodized aluminum

Alloy: 6063 (AA and ASTM)

L-3441 (UNE 38-301-89)

Fire resistance: M0 (UNE 23-727-90)

Abrasion resistance*: Very good

Lightfastness*: Excellent

Appearance and color*: EN 12373-1

Summary of content (4 pages)

PAGE 1
TECHNICAL FILE Novolistel® 3 Aluminum Profile with squared section, made of aluminum , designed to be installed as a decorative listello, a floor separator or as a stair nosing, among others. This profile is easy to install during the tile work and protects the edges of ceramic installations. It is available in high quality anodized and lacquered colors and also in exclusive ranges of color such as the exclusive Sensations range or with antibacterial properties for the sanitary and health establishments.
PAGE 2
TECHNICAL FILE Novolistel® 3 Aluminum Complementary pieces Novolistel® 3 has complementary pieces available made of Zamak to get a perfect finish. These pieces can be installed to finish two or three profiles both in horizontal installations as in vertical ones. The geometry of the piece will vary according to the finish. Materials Aluminum Novolistel® 3 is a profile made by extrusion of aluminum. Anodizing improves the corrosion resistance, mechanical resistance and appearance of profiles.
PAGE 3
TECHNICAL FILE Novolistel® 3 Aluminum As an edge protector 1. Spread a big amount of thin-set mortar on the surface to be tiled. 2. Align the profile with the corner and press it so the thin-set mortar passes through the holes of the anchoring wing. 3. Place tiles on the fixing wing and press them to get an optimal adhesion. 4. Continue tiling the wall. 5. Finally, clean the leftover material, remove the protective film if necessary and let dry. 1 2 4 3 5 As a flooring separator 1.
PAGE 4
TECHNICAL FILE Novolistel® 3 Aluminum Cleaning and maintenance The profiles should be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. You can clean the anodized finishes, if dirtiness persists, with a suitable slightly abrasive cleaning products or with specific metal cleaners.