Installation Guide

ManualsBrandsEmac ManualsFloor Installation ToolsNovolistel 3 Matt Bronze 1/2 in. x 98-1/2 in. Aluminum Tile Edging Trim

TECHNICAL FILE

R03.001_10/09/2012

Prole with squared section, made of aluminum , designed to be

installed as a decorative listello, a oor separator or as a stair nosing,

among others. This prole is easy to install during the tile work and

protects the edges of ceramic installations. It is available in high quality

anodized and lacquered colors and also in exclusive ranges of color

such as the exclusive Sensations range or with antibacterial properties

for the sanitary and health establishments.

Novolistel® 3

Aluminum

Patent:

Community design

Nº0504253-0006(4)

Material:

Anodized aluminum

Lacquered aluminum

Natural aluminum

Lenght: 8’2” / 2,5 l.m.

Dimensions:

h: 5/16”*, 3/8”, 1/2”

8*,10,12 mm.

*only some nishes

a: 3/8” / 10 mm.

Packaging: 30 u/box

Finishes:

Applications

General Features

Page 1 of 4

Lacquered and anodized

Sensations range

Antibacterial range (*check the Technical File)

Novolistel® 3 is the most versatile prole in the markets. It can be installed as:

- Decorative listello

- Edge protector

- Flooring separator*

- Stair nosing* or nishing edge (countertops, frame...)

*The lacquered nishes are not recommended to be installed in oorings

Summary of content (4 pages)

PAGE 1
TECHNICAL FILE Novolistel® 3 Aluminum Profile with squared section, made of aluminum , designed to be installed as a decorative listello, a floor separator or as a stair nosing, among others. This profile is easy to install during the tile work and protects the edges of ceramic installations. It is available in high quality anodized and lacquered colors and also in exclusive ranges of color such as the exclusive Sensations range or with antibacterial properties for the sanitary and health establishments.
PAGE 2
TECHNICAL FILE Novolistel® 3 Aluminum Complementary pieces Novolistel® 3 has complementary pieces available made of Zamak to get a perfect finish. These pieces can be installed to finish two or three profiles both in horizontal installations as in vertical ones.
PAGE 3
TECHNICAL FILE Novolistel® 3 Aluminum Installation 1. As a listello 2. 3. 4. 5. First spread a big amount of thin-set mortar on the surface to be tiled and then tile it up to the approximated height where you’ll place the listello. Place the tiles in the end of the next row, aligning them with the previous tiles. Then place the profile aligned to them, embedding the anchoring wing between the wall and the tiles.
PAGE 4
TECHNICAL FILE Novolistel® 3 Aluminum Como remate de peldaño o encimera 1. 2. 3. 4. 5. Spread a big amount of thin-set mortar on the riser Tile the riser. Then, spread a big amount of thin-set mortar on the tread and align the profile on its vertex (Do not let overhang, the leverage may remove the step and the tiles). Then press it so the thin-set mortar passes through the holes of the anchoring wing Place a tile on the tread, align it to the profile and press it to ensure a perfect adhesion.