Installation Guide

TECHNICAL FILE
R03.001_29/02/2016
Technical Information
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query, please contact our Technical Department in [e-mail]
Emac Complementos S.L. (Spain) [e-mail] // Emac America L.L.C. (FL,USA) [e-mail] // Emac Italia S.R.L. (Italy) [e-mail]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novoescuadra XL
Novoescuadra XL is a very easy to install prole.
1. First of all clean the prole and the surface to install it, to facilitate a perfect adhesion without im-
perfections
2. Then, apply adhesive on the rear of the prole to facilitate the joining. You can use common moun-
ting adhesives
3. Stick the prole to the wall and apply pressure on it to get a perfect adhesion
4. Remove the leftover material, if necessary and let dry
Installation
Cleaning and maintenance
IndoorsOutdoors Wall tiling Recyclable
Page 2 of 2
You can daily clean the prole with water and common detergents. The correct use of bleach, does not
affect it. It is resistant to the most common acids except in concentrated status.
It is not recommended the use of organic solvents such as acetate, acetone or toluene.
Thanks to its high resistance to many of the chemical products, the PVC products are ideal to be
installed in industries with saline environment, oils, etc.