Installation Guide

R03.001_18/05/2011
TECHNICAL FILE
Novoescuadra
Maxi
General Features
Material: Maxi
Length: 8ft2in / 2.5 l.m.
Dimensions: a: 1” / 25 mm.
Packaging: 50 u./box
Finishes:
Applications
Novoescuadra Maxi is a prole intended to protect the edges of ceramic installations or other kind
of walls.
The installation of Maxi outdoors, could result in a natural variation in its original color, being slightly
higher in the range of redish colors. To avoid these possible color variations due to continuous sun
exposure, we recommend installing Maxi indoors.
Technical Features and Tests
Page 1 of 3
Prole with right angle section, intended to be installed as an edge
protector in walls or countertops. This prole is made of Maxi,
exclusive Emac® raw material which belongs to the family of
products WPC (Wood Plastic Composites). Maxi integrates vegetable
bers in its composition and contributes, this way, to preserve the
Environment. It is available in a wide range of trendy colors.
Resistance to chemical
agents
Very good except acetone, chromic acid and sulfu-
ric acid.
Water absorption
Very small absorption, high dimensional stability.
Retains its weight after dry.
Fire reaction M1 Classication
UNE 23.727-90 1R
Abrasion resistance Up to 2200 cycles without variation
UNE EN 438-2:2005
Aptdo. 23
Surface resistance to
staining
Resistance to acetone, coffee 176ºF/80ºC, bitumen,
hydrogen peroxyde 30%, sodium hydroxide 25%.
Acetone: surface degradation and blisters.
Rest: without changing.
Impact resistance
Spring: 34 N
Ball drop: 3,93ft/120 cm. maximum drop /
0,38 in./9,9 mm mark diameter
Cigarette burns Surface degradation
Resistance to humidity-
drying
> 20 cycles
UNE EN 14428