Installation Guide

TECHNICAL FILE
R03.002_22/08/2011
Technical Information
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query, please contact our Technical Department in [e-mail]
The data provided are only for information and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) [e-mail] // Emac America L.L.C. (FL,USA) [e-mail]// Emac Italia S.R.L. (Italy) [e-mail]
www.emac.es
Novocanto® PVC
Installation
Page 2 de 2
1
2
3 4
5
Indoors Wall tiling
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the prole aligned to the corner and press it to let the thin-set mortar pass through the holes
on the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
Cleaning and maintenance
The cleaning can be done with water and detergent or specic cleaner disoluted. The correct use of
bleach do not affect PVC.
It is not recommended using chromic acid, sulfuric acid or organic solvents as ethyl acetate, acetone
or toluene.