Instructions

1
2
3
4*
5
6
7*
9*
12
8
10
11
14
13
11
GB
WiFi connected
Ethernet connected
WiFi data transmission
Ethernet data transmission
1. 1.5 meter connection cable with CEE plug
2. LCD display
3. LED indicators
4. Type2 plug (*only CT)
5. RFID reader
6. Emergency stop
7. Charging plug holder (CT) / *Type2 connector (ST)
8. Input terminal box
9. Charging adapter interface (*only CT)
10. Wall bracket
11. MCB
12. RJ-45 interface (Ethernet, RS-485)
13. Input cable interface
14. Input connector (L1/ L2/L3/N/PE)
Overview
Standby
Vehicle connected
Charging process
Charging nished
Display
The high-resolution LCD color display of the EM2GO charging unit shows you the following
information:
1. Charging power in real time
2. 3-phase data (voltage and current)
3. Charging time
4. Power consumption
5. Status display
LED indicators
The 4 LEDs indicate the status of the charger:
Charge the vehicle
Note: The vehicle to be charged must be parked, switched o󰀨 and the parking brake
engaged.
Switch on:
After installing and checking the charging station, press the toggle lever of the circuit breaker
in the input terminal box of the charging station upwards to establish the power supply.
The power LED lights up and the charging station switches to standby mode.
Power Connect Charging Fault
GREEN GREEN ORANGE RED Description
ON OFF OFF OFF Standby (o󰀪ine mode)
FLASHES OFF OFF OFF Standby (online mode)
OFF ON OFF OFF Charging adapter is properly
connected to the vehicle
OFF FLASHES OFF OFF Checks charging
OFF OFF FLASHES OFF Charging process
OFF OFF OFF FLASHES Error code, see display
ALTERNATELY