Data Sheet

The intelligent Em2Go EV charging station allows you to charge your electric vehicle safely and quickly. Simply connect the type 2

plug of the 7.5 metre cable with your electric vehicle, and the car is charged with 11 KW of power.

The built-in colour display informs you during the charging process about the current state of charge, charging voltage, current and

temperature. An LED strip informs you about the correct charging process.

The charging station is WiFi-enabled and can be controlled through the free App for Android and iOS devices. The main function of

the app is to monitor the status of the charging station, control the start and stop of the charging station, set the charging mode, check

and log the charging data set and update the firmware wirelessly.

The Em2Go EV charging station is equipped with intelligent electronics, so your vehicle is protected against residual current,

short circuit and high temperatures. Fixing material for wall mounting is included in the scope of delivery of the charging station.

The charging station is optionally available with RFID. A column for floor mounting is available as an accessory.

Intelligent EV charging station 11kW

EM011AC1APPO

Technische Änderungen vorbehalten / Improvement and changes of the technical specifications and other data’s could be made without prior notice

EM2GO

Technical data:

• Operating voltage: 400V AC ±10%, 47-63 Hz

• Operating current: 16 amps

• Max. Output power: 11 kW (3 Phases)

• Standby power consumption: <8W

• Charging interface: IEC 62196-2

• Connection: Type 2 plug

• Cable length: 7.5 meters

• WiFi | Bluetooth

Produkt Info

11KW 16A

LCD Display

Type 2 Plug

L1 L2 L3

3 Phases

WiFi capable

Controllable by app

IP66

• Housing: IP66, splash water protected

• Operating temperature: -25 to + 55 °C

• Display: 3.5 inch Colour LCD, LED-stripes

• Protection against: over and under voltage, overload protection, short circuit protection,

over temperature protection, lightning protection, fault current. (RCD A + 6mA DC).

• Structure: CE standards EN61851-1: 2011, EN61851-22:2002

• Dimensions: 65 x 195 x 295 mm

• Weight: 7 Kg

Art.Nr: EM011AC1APPO EAN: 4024559261077