User manual

Page 16 of 20

MSE-218SP User Manual

v1.1 February 2013

Appendix A – Technical Specifications

MSE-218 self-powered subwoofer

ACOUSTICAL

ENCLOSURE TYPE: dual drive unit bass reflex, self-powered

FREQUENCY RESPONSE

: 65Hz – 20KHz +/- 3dB

DISPERSION

: omnidirectional (unless in Cardioid mode)

DRIVE UNITS: 2 x 18” (457mm) neodymium LF cone drive unit

MAXIMUM SPL

: 137dB continuous, 143dB peak

MECHANICAL

DIMENSIONS (HxWxD): 550 (21.7) x 1300 (51.2) x 850 (33.5) mm/(ins)

NET/SHIPPING WEIGHT: 118 (259.6) / 122 (268.4) kg/(lbs)

ENCLOSURE: 18mm (3/4”) multi-laminate Birch plywood – rebated, screwed &

glued.

Finished in black semi-matt textured paint

RIGGING/SUSPENSION: 2 x M20 threaded flange adapters

8 x tour-grade bar handles

4 x tour-grade castors

GRILLE: Fabric-backed hex punched steel

AMPLIFIER PACKAGE

AMPLIFIER TYPE: Dual monobloc Class-D

AMPLIFIER POWER: 2 x 2400W RMS @ 4 ohm load

DSP SYSTEM: 96kHz sample rate, 120dB dynamic range

COOLING: 2 x low-speed 5VDC fan on heatsink – temperature controlled, only

required under extreme conditions

CONNECTORS: Female XLR input, male XLR link output (selectable as analog or

AES/EBU input)

Neutrik PowerCon

input with loop output

Neutrik Ethercon

RJ45 socket